behind the scenes — stretching a canvas

I know painters who have painted many years and have never stretched a canvas.  That’s fine… but, there are several reasons why I do it and thought you might like to see how easy it is.  If you can wrap a package you can do this!

Here’s the canvas rolled out on the studio floor.  (I bought 3 yards of unprimed 60″ wide canvas at the art store.)

amiller_4423

Next, I place the stretcher bars face down on top.  The photo makes it look like a square, but the actual size is 4′ x 5′

amiller_4424

I use this electric staple gun by Bostitch and it works great.  You can find one at your local hardware store.

amiller_4425

Next staple the canvas in the middle of each side.  Do not pull tightly… pull just enough that there are no wrinkles.  Also, make sure that the sides of the stretcher bars are running parallel to the weave of the canvas before stapling.

amiller_4426

Proceed to staple once every 4 inches or so starting at the middle staple on each side and going to the corners.

amiller_4428

Fold the cloth at the corners like you would wrap a present and staple (I usually put a few extra staples at the corners.

amiller_4427

Now the canvas is ready for gesso.

amiller_4429

Gesso is used to create a barrier between the canvas and the oil paint.  If this is not done, the oils in the paint will eventually rot the canvas.  The first coat of gesso is thinned with water to a cream like consistency.

amiller_4432

Now brush the thinned gesso onto the canvas using a large brush.  Make sure it goes into the weave and brush in all directions.

*** Most important****– start from the center of the canvas and work out.  The canvas starts to shrink and pucker when it gets wet.  See… you didn’t have to pull the canvas tight at the start because it will “shrink wrap” itself when it gets wet (like a pair of jeans that haven’t been pre-shrunk).

amiller_4433

I usually do a cross pattern like below and then fill in the remainder diagonally  ie. upper right, then lower left, etc.

amiller_4436

So here it is with the first coat finished.  It’s tight with no wrinkles.  Two more coats (not diluted) will be brushed on to complete the gessoing.  Let each coat thoroughly dry (about 24 hours) between coats.  It’s next to the canvas I worked on last week (which is unfinished).

Oh, and the reason I go through all this is to have the flexibility of getting the exact size canvas I want.  Maybe I want a 30″ x 45″ or 36″ x 54″ or 40″ x 50″ canvas… these are not standard and the art store doesn’t have these.  But they do sell stretcher bars in numerous sizes.

amiller_4442